Serial Advanced Technology Attachment is the full form of SATA. SATA is a type of interface that connects mass storage device to motherboard present inside the computer. It can also be used to transform and manage hard disk data.
Over the years, Serial Advanced Technology Attachment, i.e. the full form of SATA, has been found to be extremely advantageous for various reasons. Therefore, users decided to increase the use of SATA and reduce the use of other similar products.
History of SATA
The abbreviation SATA stands for Serial Advanced Technology Attachment. It was first created in 2002. Due to the convenience of the product, the interface has been in high demand ever since it was invented. There have been several changes to the product over the years; however, the range of demand remained the same.
SATA technology modes
SATA technology works in two modes, IDE mode and AHCI mode. AHCI mode refers to the Advanced Host Controller Interface, which is a high performance interface that provides support for hot swapping. IDE Mode is an acronym that stands for Integrated Drive Electronics, which provides backward compatibility between older hardware that runs on PATA, but at a low cost.
Main features of SATA
The main features of SATA are that SATA has a simple design that includes a 15-pin power cable and one 7-pin data cable. Thus, the SATA cable exhibits a higher signaling speed and ultimately leads to faster data throughput. The SATA interface also requires very low voltage, i.e. around 0.5V (500mV) peak signalling, which helps the user experience much lower crosstalk and wire-to-wire interference.
Another main characteristic of SATA is that it supports high data transfer speed, that is, SATA transfers data at a higher speed of 600/300/150 Mb/s, and because it exhibits such capability, it enables better image loading, faster program loading, and faster document loading.
Also, the signaling that goes along with SATA is differential, meaning it uses two adjacent wires to carry out-of-phase and in-phase signals simultaneously. It therefore enables high-speed data transmission with the consumption of comparatively lower operating voltage and less power. It also detects the phase difference between the two signals at the receiver end.
Advantages
- The Serial Advanced Technology Attachment has several benefits and understanding the full form in English will help you learn more about it.
- It has a very good transmission speed.
- The cable is quite easy to handle.
- SATA cables are smaller, so there is more room for air flow inside the computer case.
- There are about six SATA connections inside the motherboard, so multiple hard drives can be connected at the same time.
Uses
The benefits in turn led to several uses of the product. Some of the most common uses of SATA are-
- ATA and ATAPI devices can be connected.
- The interface can also be used to connect a hard drive to another hard drive.
- It can also be used to connect the hard drive to the motherboard.